Frame Grabbers
联系   Contact us
Cyton CoaXPress Family

Cyton CoaXPress Family

上市日期: 2017-03-28

PCIe 2.0, 25Gb/S, High Performance DMA Engine

定制下载附件表 返回列表

Cyton CoaXPress Family


The Cyton Family

CoaXPress (CXP) is a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. Video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data).

The CXP standard opens the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.


The Cyton Features

§   Half-Size x8 PCI Gen 2.0 Express Board

§   CoaXPress 1.1 compliant (supports 1.0 and 1.1. cameras)

§   Supports one to four CXP-6 cameras

§   Supports multi-link CXP-6 cameras (up to four CXP links)

§   Supports CXP speeds from 1.250 to 6.250 Gb/S

§   Supports simultaneous capture from four 6.250 Gb/S CXP links

§   Provides one CXP-6 uplink to the camera (bulk data uploads, zero latency triggers)

§   Low speed uplink also supported on all links

§   Uses DIN 1.0/2.3 connectors

§   Uses CXP standard 4+1 connector spacing

§   Provides power for all cameras (up to 13 Watts per link)

§   Provides Safe Power, full protection from all power line faults

§   Cameras are Plug and Play with automatic link speed detection

§   Cable lengths of up to 135 meters are supported

§   Cameras can be accurately synchronized, or can be completely independent

§   PCI Express x8 Gen 2.0 interface (also works in x16 slots)

§   Compatible with PCI Express Gen 1.0 slots

§   Separate I/O for each camera

§   Highly deterministic, low latency frame grabber to camera trigger

§   Supports simultaneous communications to all cameras

§   Windows "sees" a separate frame grabber for each camera

§   FlowThru technology means no on-board memory is needed

§   StreamSync acquisition engine optimizes synchronization between acquisition and DMA

§   StreamSync buffer manager maximize DMA channel efficiency

§   Acquire variable length frames from line scan cameras

§   Acquire image sequences well beyond the 4GB barrier

§   No frame rate limit

§   Triggers and encoders for external control of acquisition

§   Programmable signal generator for camera control (independent for each camera)

§   Quadrature encoder support including sophisticated triggering schemes

§   Encoder divider/multiplier

§   Drivers, utilities and examples for Windows and Linux

§   Supported on both 32-bit and 64-bit platforms

§   Drivers for most 3rd party processing environments (e.g. HALCON, LabView, VisionPro, MATLAB, etc.)

§   Full GenICam support for control and capture

§   All models are "half size" PCIe cards

§   RoHS compliant


Recommend Products / Products More
  • 发布时间: 2017 - 03 - 24
    The AutoMAT 5000U series autocollimators are a combination of high-precision, stability and ease of use which can responds optimally to different customer requirements and can cover a large range of applications in mechanical and optical field.As the integration of a dedicate designed high-resolution and low-distortion lens, internal optical parts, ideal mechanical construction and fully digital design technology, results up to 0.1 arc sec ultra high accuracy for angle measurement. The precise and highly reliable measurement system excels in ease of use. The new ergonomically adapted measureme...
  • 发布时间: 2017 - 03 - 23
    The AutoMAT CM-B series is an alternative version of the robust and compact CM series of autocollimators. This series of products, are designed with integrated power supply and control within a single USB cable and also maintain the perfect balance between cost and performance purpose, while with easy operation and high reliability features make it well suited for field test and measurement in mechanical and optical applications. Features■      Compact Design■      Magnetic Mirror & Adjustable Holder as STD accessory■   ...
  • 发布时间: 2017 - 03 - 23
    The AutoMAT FM-I series is a robust internal focusing auto-collimator equipment that offer larger focusing range than standard FM series which can cover large range of optical applications. This series of products, integrate a high speed data interface and high resolution image sensor and same display unit as the AutoMAT AM series. The real-time video image & software reticle display make the equipment also function as a standard focusing telescope. Features■      Internal Focusing■      Embedded Display Unit or USB interface■ ...
  • 发布时间: 2017 - 03 - 29
    The OptiMAT is a comprehensive line of basic optical and electric-optical equipment specially designed for general purpose optical testing configurations. The modular designs of the series products including collimators, electric telescopes and additional mechanical and optical hardware and software which can cover most demanding setups required by fast changing applications. Features■      Flexible to set up system to cover most demanding applications■      Cost effective solution for optical testing■      Compati...
  • 发布时间: 2017 - 03 - 27
    The brand new S4 series tri-linear color / mono camera link line scan CCD cameras are functional upgrade of our success of S1 series. The S4 series covers tri-linear CCD resolution from 2K pixels to 10K pixels, it offers superb image quality and some exciting functions like auto white-balance setting, shading or flat-field correction, and space correction for tri-linear scan image.The flat and robust construction type of S4 series make it more efficient in heat-sinking which can meet most harsh industrial environments, these advantage of the series makes the camera suitable for large range of ...
  • 发布时间: 2017 - 03 - 28
    The Axion-CL FamilyBitFlow has been making Camera Link frame grabbers since 1999. With each successive generation of frame grabbers, BitFlow has improved the quality, flexibility and robustness of their interfaces. Meanwhile, much has changed on the backend; PCI to PCIe, Gen 1 to Gen 2, etc. Also the Camera Link Specification had been continuously evolving: 80-bit (10-tap) mode was added, Power over Camera Link (PoCL), new connectors, new tap formats. Even though the specification has been around a long time, it is still one of the simplest, efficient and least expensive ways to get camera dat...
  • 发布时间: 2017 - 03 - 28
    Features■      High Power LED Chips■      High speed CC controller■      Enhanced Active Heat Sinking Design■      Uniform Illumination■      ODM Design Available     Specifications
Contact us Room 1-404, Lan Yuan Lu Str.9
HuaYuan Hi-Tech Park, XiQing, Tianjin, China.
86 - 22 - 8371 9418
Copyright ©2007 - 2017 ATMV Co., LTD.


  • 资料待更新